Sale
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer
Click to zoom in

4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer

Mitsubishi
U5.260605.237
In stock
Wheels & Tires
$82.43 $61.98
$61.98

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Door Window Seals & Weatherstripping

4-40 Weatherstrip Window Trim Seal Belt Front Rear for 2008-17 Mitsubishi Lancer

OE Reference Grade 3-Year Warranty Clip-On Installation Direct Fit 4-Piece Kit

Product Overview

Your Mitsubishi Lancer's door window belt weatherstrips serve as the critical seal between the glass and the door frame. Over time, exposure to UV rays, temperature extremes, and normal wear causes the rubber to harden, crack, or pull away — allowing wind noise, water leaks, dust infiltration, and even rattles to enter your cabin. When these seals fail, you not only lose driving comfort but also risk moisture damage to door internals and premature wear on window regulators.

This AUXITO 4-piece weatherstrip kit is precision-engineered to match OEM specifications for the 2008–2017 Mitsubishi Lancer. Manufactured from high-grade, heat-resistant rubber with a matte black finish, each T-shaped seal clips securely into the factory channel without any drilling, cutting, or adhesives. By restoring the original seal integrity, you eliminate drafts, reduce road noise, and keep water where it belongs — outside your vehicle.

Designed for both front and rear doors on left and right sides, this complete set provides everything needed to refresh your Lancer's window seals in a single purchase. Whether you drive a base ES, sporty GT, or Rallyback, this direct-fit solution delivers OE-level performance at a fraction of the dealer cost — making it the smart choice for owners who value a quiet, dry, and comfortable ride.

Key Features & Benefits

✔ Premium Rubber Construction
Built from durable, heat-resistant rubber that resists cracking, shrinkage, and UV degradation — ensuring long-lasting performance through all four seasons.
✔ Noise Reduction That Works
The tight, consistent seal eliminates wind whistle, door rattle, and exterior noise intrusion — giving you a noticeably quieter cabin on highways and rough roads.
✔ Complete 4-Piece Kit
Covers all four doors — front left, front right, rear left, and rear right — so you replace worn seals everywhere at once, saving time and ensuring uniform performance.
✔ Tool-Free Clip-On Installation
Factory-style T-shaped design presses directly into the existing window channel — no drilling, cutting, or adhesive required. A straightforward DIY upgrade anyone can complete.
✔ Waterproof & Weather-Resistant
Full perimeter sealing protection prevents rainwater, car wash spray, and snow melt from leaking past the window into the door cavity and interior panels.
✔ Precision Fit for Mitsubishi Lancer
Engineered specifically for 2008–2017 Lancer models with exact dimensions and channel geometry — not a universal "one-size-fits-all" compromise.

Product Specifications

Brand AUXITO
Product Type Door Window Belt Weatherstrip Kit
OE / OEM Part Numbers 5727A005, 5727A006, 5757A017, 5757A018
Interchange Part Numbers 5727A005, 5727A006, 5757A017, 5757A018
Placement on Vehicle Front, Rear, Left, Right (All 4 Doors)
Material High-Grade Rubber
Color / Finish Black, Matte
Style T-Shape
Attachment Type Clip-On (No Drilling Required)
Item Length 95.2 cm / 37.48 in (per strip)
Quantity in Package 4 Pieces (2 Front + 2 Rear)
Packaging Weight 1,015 g (2.24 lbs)
Manufacturer Warranty 3 Years
Country of Manufacture China
Universal Fitment No — Vehicle-Specific Design

Vehicle Fitment & Compatibility

Important: Always verify your vehicle's OE part numbers (5727A005, 5727A006, 5757A017, 5757A018) against your original weatherstrips before purchasing. This kit is designed specifically for the models and years listed below — it is not a universal fit product.

Mitsubishi

Lancer ES 2008–2017
Lancer GT 2008–2017
Lancer SE 2008–2017
Lancer DE 2008–2017
Lancer GTS 2008–2017
Lancer Ralliart 2008–2015
Lancer Evolution X 2008–2015
Lancer Sportback 2010–2017
Lancer GT Sedan 2008–2017

Installation Guide

Difficulty: Easy  |  Estimated Time: 20–35 minutes per door  |  Tools Required: Trim removal tool (optional), clean rag, mild soap solution. No drilling, cutting, or adhesive needed — all four strips clip directly into the factory channels.

1
Clean the window channel. Lower the window halfway. Wipe the door channel thoroughly with a mild soap solution and a clean rag to remove dirt, old grease, and debris. Let it dry completely.
2
Remove the old weatherstrip. Starting at one end, gently pull the old seal upward and out of the channel. If it is stuck, use a trim removal tool to pry it loose without scratching the paint.
3
Test-fit the new strip. Before pressing it fully in, align the new AUXITO weatherstrip along the door channel to confirm correct orientation — the T-shaped lip should face inward toward the glass.
4
Press the seal into place. Starting at the front of the door, push the T-shaped rubber strip firmly into the channel using your fingers. Work your way toward the rear, making sure it seats evenly along the entire length.
5
Check glass movement. Roll the window up and down slowly. The seal should contact the glass evenly without binding or excessive friction. If the window drags, gently reposition the strip.
6
Repeat for remaining doors. Follow the same procedure for each of the other three doors. Once all four strips are installed, test-drive at highway speeds to confirm reduced wind noise and a water-tight seal.

Package Includes

2 × Front Door Window Weatherstrip Seals (Left & Right) — pre-cut to factory length
2 × Rear Door Window Weatherstrip Seals (Left & Right) — pre-cut to factory length
Complete 4-Piece Set — as shown in product images

Search Terms

Mitsubishi Lancer window seal 5727A005 5727A006 5757A017 5757A018 door belt molding window trim seal weatherstrip kit Lancer window weatherstrip 2008 Lancer door seal 2017 Lancer door seal wind noise reducer AUXITO weatherstrip T-shape belt molding waterproof window seal OE 5727A005 5727A006 Lancer Evolution X seal clip-on door weatherstrip

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×