Sale
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L
Click to zoom in

Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L

Nissan
U5.260605.240
In stock
Exterior Accessories
$33.50 $25.18
$25.18

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

EVAP System / Emissions Control

Vapor Canister Purge Solenoid Valve Fit Nissan 2008-2011 Altima 2.5L/3.5L

Direct Replacement OEM Quality 2-Year Warranty Easy DIY Install

Product Overview

The Vapor Canister Purge Solenoid Valve is a critical component of your vehicle's Evaporative Emission Control (EVAP) system. Its primary job is to regulate the flow of fuel vapors from the charcoal canister into the intake manifold to be burned during combustion. When this solenoid fails—often due to age, heat cycling, or contamination—your engine can no longer properly meter these vapors, leading to a rough idle, hard starting after refueling, poor fuel economy, and an illuminated Check Engine Light.

This direct-replacement purge solenoid is engineered to meet or exceed the strict specifications of the original factory component. It matches OEM part numbers 14935-AM600, 14935-AM60A, 14935-AM60B, 14935-JF00B, and 14935-JF00A, ensuring a precise fit and seamless integration with your vehicle's engine management system. Constructed from high-grade, heat-resistant ABS plastic, this valve is built to withstand the harsh under-hood environment for years of reliable service.

Designed specifically for the 2008-2011 Nissan Altima with 2.5L or 3.5L engines, this solenoid offers a straightforward, plug-and-play solution to common EVAP system failures. Save hundreds compared to dealership prices by tackling this simple DIY replacement yourself. Restore your engine's performance, pass your next emissions test, and eliminate those annoying starting issues with this high-quality, professionally sourced component.

Key Features & Benefits

✔ OEM Exact Fit Design
This valve is a direct bolt-on replacement for your original unit. No cutting, splicing, or modifications are required—just unbolt the old one and install this in minutes.
✔ Eliminates Common EVAP Symptoms
Specifically designed to resolve hard starting after filling up with gas, rough idling, and Check Engine Light codes such as P0441, P0445, and P0455. Restore your engine's performance immediately.
✔ Premium ABS Construction
Manufactured from high-impact, thermal-resistant ABS plastic to withstand extreme under-hood temperatures and resist cracking, warping, or melting over time.
✔ Matches OEM Part Numbers Exactly
Replaces OEM part numbers 14935-AM600, 14935-AM60A, 14935-AM60B, 14935-JF00B, and 14935-JF00A. Perfect compatibility with your Nissan engine management system.
✔ 100% New & Rigorously Tested
Do not settle for used or questionable parts. This is a brand-new unit that has undergone strict quality control to ensure perfect internal sealing and solenoid actuation.
✔ 2-Year Manufacturer Warranty
Backed by a comprehensive 2-year warranty for complete peace of mind. If you experience any defects in material or workmanship, we have you covered.

Product Specifications

Brand delightworld9 Professional
Part Type Vapor Canister Purge Solenoid Valve
Material High-Temperature ABS Plastic
OE/OEM Part Numbers 14935-AM600, 14935-AM60A, 14935-AM60B, 14935-JF00B, 14935-JF00A
Manufacturer Part Number TGDCF-Altima-04-15
Fitment Type Direct Replacement (OE Grade)
Condition 100% Brand New
UPC 707943735661
Warranty 2-Year Manufacturer Warranty

Vehicle Fitment & Compatibility

Important: Please verify the OE part number (14935-AM600, 14935-AM60A, 14935-AM60B, 14935-JF00B, 14935-JF00A) matches your original unit to ensure perfect fitment. If you are unsure, please contact us with your VIN.

Nissan

Altima (2008-2011) 2.5L / 3.5L
Altima (2012-2013) 2.5L / 3.5L
350Z (2003-2009) 3.5L
370Z (2009-2013) 3.7L
Cube (2009-2013) 1.8L
Frontier (2005-2013) 2.5L / 4.0L
GT-R (2009-2013) 3.8L
Juke (2011-2013) 1.6L
Maxima (2003-2012) 3.5L
Murano (2003-2011) 3.5L
Pathfinder (2005-2012) 4.0L / 5.6L
Quest (2004-2012) 3.5L
Rogue (2008-2013) 2.5L
Sentra (2003-2004) 1.8L / 2.5L
Titan / Armada (2005-2013) 5.6L
Versa (2007-2012) 1.6L / 1.8L
Xterra (2005-2012) 2.5L / 4.0L
NV1500/2500/3500 (2012) 4.0L / 5.6L
X-Trail (2005-2006) 2.5L

Infiniti

G35 (2003-2008) 3.5L
G37 (2008-2013) 3.7L
EX35 / FX35 (2008-2012) 3.5L
M35 / M45 (2006-2010) 3.5L / 4.5L
FX45 / QX56 (2003-2013) 4.5L / 5.6L

Installation Guide

Difficulty: Easy to Moderate | Estimated Time: 20-30 Minutes | Required Tools: Ratchet, 10mm socket, extension, flathead screwdriver, safety glasses.

1
Disconnect Battery & Locate Valve. Disconnect the negative battery terminal to ensure safety and allow the ECU to reset. The purge solenoid is typically located on or near the intake manifold plenum, often connected to a hard plastic EVAP line.
2
Remove Electrical Connector. Press the locking tab on the electrical connector and carefully pull it straight off the valve. Avoid pulling on the wiring harness itself.
3
Detach EVAP Hoses. Using a flathead screwdriver if necessary, gently release the locking tabs on the EVAP vapor hoses. Mark or remember the routing of the hoses to ensure correct reinstallation.
4
Remove the Old Solenoid. Use a 10mm socket and ratchet to remove the mounting bolt securing the solenoid to the manifold or bracket. Lift the old valve out.
5
Install New Valve. Position the new delightworld9 Professional solenoid in place. Secure it with the mounting bolt and tighten gently. Reconnect the EVAP hoses, pushing firmly until they click into place. Plug in the electrical connector.
6
Reconnect Battery & Test. Reconnect the negative battery cable. Start the engine and let it idle. The Check Engine Light should be off. Take it for a test drive, allowing the ECU to run its self-checks. Your hard start issue should be resolved.

Package Includes

1 × Vapor Canister Purge Solenoid Valve — Brand new, ready to install (as shown in product images).

Search Terms

Vapor Canister Purge Valve Purge Solenoid EVAP Solenoid 14935-AM600 14935-AM60A 14935-AM60B 14935-JF00B 14935-JF00A Nissan Altima Purge Valve 2008 Nissan Altima 2009 Altima 2.5L 2010 Altima 3.5L 2011 Altima P0441 P0455 Check Engine Light EVAP System Fix Emissions Control

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×