Sale
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE
Click to zoom in

2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE

Toyota
U5.260605.037
In stock
Wheels & Tires
$30.30 $22.79
$22.79

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Body & Trim > Bumper Molding & Valances

2X Right Left Rear Bumper Lower For Trim Molding 2018-2020 Camry Toyota SE/XSE

Direct Replacement OEM Quality 2-Piece Set Scratch Resistant

Product Overview

The rear bumper lower trim is a critical aesthetic and protective component for your Toyota Camry. Positioned along the lower edge of the rear bumper fascia, this molding shields the paint and bodywork from road debris, scuffs during parking, and everyday wear. Over time, these plastic trims can crack, fade from UV exposure, or become damaged from minor impacts, instantly making your vehicle look neglected and aged.

This AUXITO replacement trim is engineered to restore your Camry's factory-fresh appearance. Manufactured from high-grade ABS plastic to match the exact OEM specifications (OE #5272406010), these moldings provide a seamless, precise fit that mirrors the original part. The textured black finish offers superior scratch and UV resistance, ensuring long-lasting durability and a clean, sporty look that complements the SE and XSE trims perfectly.

Designed specifically for the 2018-2020 Toyota Camry SE and XSE, this direct-fit kit includes both the right and left sides for a complete rear-end restoration. Priced affordably at just $15.19, it is a fraction of the cost of a full bumper replacement. With simple DIY installation and no modifications required, you can quickly reverse damage and protect your vehicle's value with minimal effort.

Key Features & Benefits

✔ OEM Exact Fit Design
Manufactured precisely to Toyota's OE specifications (5272406010), guaranteeing a flawless seam and contour match with your 2018-2020 Camry SE/XSE bumper.
✔ Durable ABS Construction
Unlike cheap PP or PVC alternatives, this molding is crafted from high-impact ABS plastic. It offers excellent flexibility and resilience against cracking in extreme temperatures (-40~60℃).
✔ Scratch & UV Resistant Finish
The deep black textured surface is engineered to resist fading from sunlight and withstand scuffs from cargo loading, car washes, and daily urban driving.
✔ Complete 2-Piece Set
Includes both the right and left rear lower bumper moldings. This balanced package ensures a uniform, symmetrical upgrade without the hassle of sourcing parts separately.
✔ Effortless Direct Installation
Engineered for a simple, tool-free installation. The moldings clip directly onto the factory mounting points without requiring drilling, cutting, or heavy modifications.
✔ Reliable Warranty Protection
Backed by a comprehensive 2-year manufacturer warranty from AUXITO, providing peace of mind and confidence in your purchase against manufacturing defects.

Product Specifications

Brand AUXITO
Product Type Rear Bumper Lower Trim Molding
Placement on Vehicle Rear (Left & Right)
Material High-Grade ABS Plastic
Color / Finish Black (Textured)
OE/OEM Part Number 5272406010
Quantity Included 2 Pieces (Driver & Passenger Side)
Fitment Type Direct Replacement
Operating Temperature -40°F to 140°F (-40°C to 60°C)
Country of Origin Taiwan
Manufacturer Warranty 2 Years

Vehicle Fitment & Compatibility

⚠ Important Fitment Note: This trim molding is specifically designed for the Toyota Camry SE & XSE trims (2018-2020). It will not fit the LE, XLE, or Hybrid trims due to differences in the rear bumper fascia. Please double-check your vehicle's trim level before purchasing.

TOYOTA

2018 Toyota Camry SE
2018 Toyota Camry XSE
2019 Toyota Camry SE
2019 Toyota Camry XSE
2020 Toyota Camry SE
2020 Toyota Camry XSE

Installation Guide

Difficulty: Easy (Beginner-Friendly) | Estimated Time: 20-30 Minutes | Tools Required: Trim removal tool or flathead screwdriver wrapped in painter's tape, microfiber cloth, rubbing alcohol.

1
Clean the Mounting Surface. Thoroughly wash and dry the lower bumper area. Use rubbing alcohol on a microfiber cloth to remove any wax, grease, or residual adhesive from the old trim. A clean surface ensures a tight, flush fit.
2
Remove Old Trim (if applicable). Gently pry off the damaged trim using a trim removal tool. Start from one edge and work your way across. If reusing factory clips, ensure they are intact and transferred to the new molding.
3
Align the New Molding. Hold the new AUXITO trim piece up to the bumper. Align the clip holes and the contour of the molding perfectly with the bumper's edge. Start with the side closest to the wheel well.
4
Snap the Trim into Place. Apply firm, even pressure with the palm of your hand directly over the clip points. Listen for distinct "click" sounds, which indicate that the clips are fully seated and secure.
5
Repeat for the Opposite Side. Follow the same process for the remaining right or left molding. Ensure both sides are symmetrically aligned and sit flush against the bumper.
6
Final Inspection & Test. Run your fingers along the seams to ensure there are no sharp edges or gaps. Check that the trim is firmly attached across its entire length. Enjoy your refreshed rear bumper appearance!

Package Includes

1 × Left Rear Bumper Lower Trim Molding — Direct replacement for driver side
1 × Right Rear Bumper Lower Trim Molding — Direct replacement for passenger side

*Trim clips and mounting hardware are pre-installed or reused from original factory parts.

Search Terms

2018 Camry Rear Trim 2019 Camry Bumper Molding 2020 Camry Lower Valance Toyota Camry SE XSE Trim 5272406010 Rear Bumper Lower Molding Bumper Trim Replacement AUXITO Bumper Parts ABS Plastic Trim Rear Diffuser Trim Camry Exterior Accessories Black Bumper Molding Scuff Protector Trim Direct Fit Bumper Trim OEM Replacement Parts Left Right Bumper Set Camry Rear Bumper Lower 2018-2020 Camry Trim Kit

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×