Sale
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma
Click to zoom in

2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma

Toyota
U5.260605.106
In stock
Car Lighting
$26.51 $19.93
$19.93

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Lighting » License Plate Lights » LED Replacement

2-20PCS LED Plate Light Bumper License For Rear Tag 1995-2004 Assy Toyota Tacoma

LED Technology CANbus Error‑Free IP68 Waterproof 30,000 Hour Lifespan 2‑Year Warranty

Product Overview

Your Toyota Tacoma’s factory license plate lights are designed to illuminate the rear tag for safety and legal compliance — but over time the original halogen bulbs dim, turn yellow, or burn out completely. A failing license plate light not only reduces rear visibility at night but can also result in a traffic citation. Upgrading to a modern LED solution restores bright, white light that meets DOT visibility standards and gives your truck a clean, updated look.

This AUXITO LED license plate light assembly is a direct OE‑replacement for the 1995‑2004 Toyota Tacoma. Each unit houses 18 high‑intensity 5050 SMD LEDs (36 total per pair) that output 3000 lumens of crisp 6000K cold white light — three times brighter than stock bulbs. The CANbus‑compatible design prevents dashboard error messages and flickering, while the IP68 rating means it’s sealed against dust, rain, and road spray for years of trouble‑free service. With a rated lifespan of 30,000 hours, you’ll never need to replace these lights again.

Designed for a simple plug‑and‑play installation, this pair of assemblies includes the housing, lens, and circuit board — no wiring modifications required. Simply unbolt your old factory unit, disconnect the harness, clip in the new AUXITO light, and reinstall. Whether you’re restoring a worn‑out Tacoma or adding a modern touch to your daily driver, this affordable upgrade delivers immediate, reliable lighting that lasts.

Key Features & Benefits

✔ CANbus Compatible – No Error Messages
Built‑in resistor prevents bulb‑out warnings and hyper‑flash on vehicles with computer‑monitored lighting circuits. Works seamlessly with your Tacoma’s factory system.
✔ IP68 Waterproof – All‑Weather Durability
Fully sealed housing keeps out moisture, mud, and snow. Rain, car washes, and extreme weather won’t affect performance or cause condensation inside the lens.
✔ 6000K Cold White Light – Superior Visibility
36 high‑power LEDs produce 3000 lumens of bright, pure white light that closely matches daylight. Improves rear illumination and gives your truck a modern, aggressive appearance.
✔ Direct Factory Fit – No Modifications Needed
Exact replacement for the OEM license plate light assembly on 1995‑2004 Toyota Tacoma. Includes mounting bracket and connector — simply unplug the old unit and install this one.
✔ 30,000‑Hour Lifespan – Set & Forget
LEDs last up to 30 times longer than standard halogen bulbs. No more frequent bulb changes; these will outlast the life of your vehicle under normal use.
✔ Ultra‑Low Wattage – 5W per Light
Consumes only 5W per light (10W total for the pair) while delivering three times the brightness of original 10W halogens. Reduces electrical load and runs cooler.

Product Specifications

Brand AUXITO
Type LED License Plate Light Assembly
Light Color Cold White – 6000K
Lumens (per pair) 3000 lm (1500 lm per light)
Wattage (per light) 5 W
Voltage 12V DC (standard automotive)
Bulb Fitment Code C5W
Number of LEDs 36 total (18 per light)
Lifespan Up to 30,000 hours
Waterproof Rating IP68 (dust‑tight, submersible)
CANbus Compatible Yes – error‑free on most systems
Placement Rear – License Plate Light
Material ABS Housing + Clear PC Lens
Country of Origin China
Warranty 2 Years

Vehicle Fitment & Compatibility

⚠ Important: This part is designed specifically for the 1995‑2004 Toyota Tacoma with a C5W bulb size. Always verify your vehicle’s year, make, and model before ordering. If your Tacoma uses a different bulb base or connector, this assembly may not fit without modification.

Toyota

1995 Toyota Tacoma
1996 Toyota Tacoma
1997 Toyota Tacoma
1998 Toyota Tacoma
1999 Toyota Tacoma
2000 Toyota Tacoma
2001 Toyota Tacoma
2002 Toyota Tacoma
2003 Toyota Tacoma
2004 Toyota Tacoma
Also fits other vehicles that use a C5W bulb (check your owner’s manual for bulb code).

Installation Guide

Difficulty: Easy  |  Time: 10–15 minutes  |  Tools needed: Flathead screwdriver or plastic trim tool, small pick (optional). No wiring cutting or soldering required.

1
Remove the old license plate light. Locate the two screws or plastic push‑pins holding the light assembly to the bumper or tailgate panel. Use a screwdriver or trim tool to carefully remove them.
2
Pull out the factory housing. Gently pry the old light away from the vehicle. If it’s stuck, work a trim tool around the edges to break the seal. Do not force it — the plastic may be brittle.
3
Disconnect the wiring harness. Unplug the factory connector from the back of the old light. If it’s tight, use a small pick or flathead to release the locking tab.
4
Connect the new AUXITO light. Plug the vehicle’s harness into the connector on the back of the LED assembly. It will only fit one way — do not force it. Listen for a click indicating a secure connection.
5
Mount the new assembly. Press the light into the bumper cutout until it sits flush. Reinstall the screws or push‑pins and tighten until snug. The housing should not move or rattle.
6
Test the lights. Turn on your headlights or parking lights to verify the license plate lights illuminate brightly and evenly. Check for flickering, error messages, or dim spots — if all is well, you’re done!

Package Includes

☑ 2 × LED License Plate Light Assembly — complete with housing, lens, pre‑installed LEDs, and wiring connector — precisely as shown in product images.

Search Terms

LED license plate light Toyota Tacoma license plate bulb 1995-2004 Tacoma rear tag light C5W LED replacement 6000K cold white CANbus error free IP68 waterproof light AUXITO license plate light bumper license plate light rear tag light assembly 36 LED plate light 3000 lumens 5W LED license light Toyota Tacoma exterior light direct replacement license plate OEM style LED light no error light bulb plug and play tag light

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×