Sale
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio
Click to zoom in

1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio

Hyundai
U5.260605.134
In stock
Exterior Accessories
$68.21 $51.28
$51.28

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

① BANNER
Steering System Electronics

1PCS Steering Angle Sensor 93480-3R000 Fit Hyundai Sonata Kia Cadenza Optima Rio

Direct Replacement OEM Spec 93480-3R000 4-Pin Connector 2-Year Warranty
② PRODUCT OVERVIEW

Product Overview

The steering angle sensor is a critical component of your vehicle's electronic stability control (ESC) and traction control systems. Mounted within the steering column, it continuously monitors the exact position and rotation speed of the steering wheel, relaying this data to the ECU. When this sensor fails or begins to deliver erratic signals, you may notice the ESC warning light illuminated on your dashboard, reduced stability control function, or even a persistent steering wheel off-center condition that affects daily driving confidence.

This AUXITO Steering Angle Sensor — OEM number 93480-3R000 — is engineered to meet or exceed factory specifications for Hyundai and Kia models. Manufactured from high-grade ABS plastic with precision internal circuitry, it delivers accurate, real-time steering input data to restore full functionality of your vehicle's driver-assist and stability systems. Choosing this direct replacement means you avoid unnecessary dealer visits and get back on the road with a properly calibrated, safe steering system.

Whether you drive a Hyundai Sonata, Kia Optima, Cadenza, Rio, or Elantra, this sensor is designed for straightforward installation using basic hand tools. It comes backed by a 2-year manufacturer warranty and a 180-day return policy, giving you complete peace of mind. Restore your vehicle's handling precision and safety systems with a reliable replacement part that fits like the original.

③ KEY FEATURES

Key Features & Benefits

✔ Restores Full Stability Control Function
Delivers precise steering angle data so your ESC, traction control, and torque vectoring systems operate as intended — clearing warning lights and restoring confidence in every turn.
✔ OEM-Matched 4-Pin Connector
The direct-fit 4-pin electrical interface matches the factory connector on compatible Hyundai and Kia models, eliminating the need for wiring modifications or adapters.
✔ Durable ABS Housing for Long Life
Premium-grade ABS plastic construction resists heat cycling, vibration, and mechanical wear inside the steering column, ensuring stable signal transmission for years of reliable service.
✔ Lightweight yet Robust Design
Weighing only 87 grams, the sensor places minimal additional load on steering column components while maintaining the structural integrity needed for demanding daily driving conditions.
✔ Quick DIY-Friendly Installation
Designed as a direct bolt-in replacement — simply remove the old sensor, install the new unit, and reconnect the wiring. Most installations can be completed in under 30 minutes with basic hand tools.
✔ Verified Compatibility with 5 Popular Models
Engineered specifically for 2011-2015 Hyundai Sonata & Elantra, and 2010-2016 Kia Optima, 2012-2015 Rio, and 2014-2016 Cadenza — a proven fit for these platforms.
④ PRODUCT SPECIFICATIONS

Product Specifications

Brand AUXITO
OEM / OE Part Number 93480-3R000 / 934803R000
Interchange Part Number 93480-3R000
Product Type Steering Angle Sensor
Placement on Vehicle Front (Steering Column)
Number of Pins 4 Pins
Material ABS Plastic
Color Black
Fitment Type Direct Replacement
Universal Fitment No — Specific Fitment
Packaging Weight 87 g (approx.)
Packaging Dimensions 16 x 12 x 4.5 cm
Country of Origin China
Manufacturer Warranty 2 Years
Return Policy 180-Day Money Back or Exchange
⑤ FITMENT

Vehicle Fitment & Compatibility

Important: Please verify your vehicle's OE part number (93480-3R000) before ordering. This sensor is specifically designed for the models listed below. Always double-check compatibility using your VIN or existing part number to ensure a perfect match.

Hyundai

Hyundai Sonata 2011-2015
Hyundai Elantra 2011-2015

Kia

Kia Optima 2010-2016
Kia Rio 2012-2015
Kia Cadenza 2014-2016
⑥ INSTALLATION

Installation Guide

Difficulty: Intermediate — Estimated Time: 20–40 minutes — Tools Needed: Socket set, trim removal tool (if needed), flathead screwdriver. Always disconnect the negative battery cable before working on any steering column components to prevent accidental airbag deployment or electrical shorts.

1
Disconnect Battery & Position Steering Wheel. Turn the steering wheel to the straight-ahead position, turn off the ignition, and disconnect the negative battery terminal. Wait at least 2 minutes before proceeding.
2
Remove Lower Steering Column Cover. Using a trim removal tool or flathead screwdriver (wrapped in tape), carefully pry off the lower cover pieces to access the steering column area where the sensor is mounted.
3
Unplug the Old Sensor Connector. Locate the 4-pin electrical connector attached to the existing steering angle sensor. Press the locking tab and gently pull the connector free. Avoid pulling on the wires directly.
4
Remove the Faulty Sensor. Use a socket or screwdriver to remove the mounting screws or clips securing the sensor to the steering column housing. Carefully lift the old sensor out of its mounting position.
5
Install the New AUXITO Sensor. Position the new sensor (93480-3R000) into the same mounting location, ensuring the alignment tabs match. Secure it with the original screws or clips and reconnect the 4-pin connector until it clicks firmly.
6
Reassemble & Test. Reinstall the steering column covers, reconnect the battery, and start the vehicle. Turn the steering wheel lock-to-lock slowly. The ESC and traction control warning lights should turn off after a short calibration drive (typically a few hundred feet).
⑦ PACKAGE INCLUDES

Package Includes

1 × AUXITO Steering Angle Sensor (93480-3R000) — Brand new, direct-fit replacement as shown in product images
⑧ SEARCH TERMS

Search Terms

steering angle sensor 93480-3R000 934803R000 Hyundai Sonata Hyundai Elantra Kia Optima Kia Rio Kia Cadenza ESC sensor stability control sensor traction control sensor steering position sensor 4 pin steering sensor ABS steering angle AUXITO direct replacement sensor steering column sensor ESC warning light fix

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×