Vapor Canister Purge Valve Solenoid for Infiniti FX35 FX45 2003-2007

Infiniti
358530105348
In stock
Replacement Parts
$26.76
$26.76

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

EVAP System Components

Vapor Canister Black Valve Purge For Infiniti FX35/FX45 03 04 3.5L/4.5L 05 06 07

OEM Quality Direct Fit 1 Year Warranty OEM #14935-AM600

Product Overview

The vapor canister purge solenoid valve is a critical component of your vehicle’s Evaporative Emission Control (EVAP) system. Its job is to regulate the flow of fuel vapors from the charcoal canister into the intake manifold, where they are burned during combustion. When this valve fails, you may notice rough idling, difficulty starting after refueling, illuminated check engine light with codes like P0441, P0443, or P0455, and even reduced fuel economy.

This replacement valve is manufactured to meet or exceed original equipment (OE) specifications, using high-grade ABS plastic and precision internal components. It is a direct plug-and-play replacement for the original part – no modifications, adapters, or special tools required. Each unit is tested for proper sealing and electrical response to ensure reliable operation.

Designed for a broad range of Nissan and Infiniti vehicles from 2003–2022, this purge solenoid is an affordable, long-lasting solution to restore your EVAP system’s performance. Whether you’re a DIY enthusiast or a professional mechanic, you can install this part in under 20 minutes with basic hand tools and enjoy a trouble-free driving experience.

Key Features & Benefits

✔ OEM-Spec Construction
Manufactured from high-strength ABS plastic and precision-wound coil to match factory tolerances. Delivers consistent vacuum control and long service life.
✔ Direct Fit Replacement
No modifications needed – simply unplug the old solenoid and install this one. Identical connector, mounting bracket, and hose port orientation.
✔ Clears Check Engine Light
Resolves EVAP trouble codes including P0441 (incorrect purge flow), P0443 (purge solenoid circuit), and P0455 (gross leak). Eliminates rough idle and hard starts.
✔ Wide Compatibility
Covers dozens of Nissan and Infiniti models from 2003 to 2022 – Altima, 350Z, FX35, G35, Murano, Pathfinder, and more. See fitment table below.
✔ 1-Year Warranty & Free Support
Backed by a full 1-year manufacturer warranty and lifetime technical support. If you have any questions, our team is ready to help.

Product Specifications

Brand delightworld9 Professional
OEM / OE Part Numbers 14935-AM600, 14935-AM60A, 14935-AM60B, 14935-JF00B, 14935-JF00A
Material ABS Plastic / Electrical solenoid
Certification OE Grade – meets original specifications
Fitting Type Direct Replacement – plug & play
Warranty 1 Year
Country of Origin China

Vehicle Fitment & Compatibility

⚠ Important: Verify your vehicle’s OE part number before purchasing. This solenoid fits models using 14935-AM600, 14935-AM60A, 14935-AM60B, 14935-JF00B, or 14935-JF00A. Always check connector shape and mounting orientation.

Infiniti

EX35 2009–2012 3.5L
FX35 / FX45 2003–2008 3.5L/4.5L
G35 2003–2008 3.5L
G37 2008–2013 3.7L
M35 2006–2008 3.5L
M37 2011 3.7L
M45 2006–2010 4.5L
QX56 2004–2013 5.6L

Nissan

350Z 2003–2009 3.5L
370Z 2009–2013 3.7L
Altima 2008–2013 2.5L/3.5L
Armada 2005–2013 5.6L
Cube 2009–2013 1.8L
Frontier 2005–2013 2.5L/4.0L
GT-R 2009–2013 3.8L
Juke 2011–2013 1.6L
Maxima 2003–2013 3.5L
Murano 2003–2011 3.5L
NV1500/2500/3500 2012 4.0L/5.6L
Pathfinder 2005–2012 4.0L/5.6L
Quest 2004–2012 3.5L
Rogue 2008–2013 2.5L
Sentra 2003–2004 1.8L/2.5L
Titan 2005–2013 5.6L
Versa 2007–2013 1.6L/1.8L
Xterra 2005–2012 2.5L/4.0L
X-Trail 2005–2006 2.5L

Installation Guide

Difficulty: Easy (DIY) | Time: ~20 minutes | Tools required: 10mm socket/wrench, flathead screwdriver (for hose clamp), and safety glasses. Work in a well-ventilated area with the engine cool.

1
Locate the purge solenoid. It is typically mounted on the intake manifold or near the engine’s front, attached with one or two bolts and connected to a rubber hose and an electrical connector.
2
Disconnect the electrical connector. Press the locking tab and pull straight off. Avoid pulling on the wires.
3
Remove the vacuum hose. Use a flathead screwdriver to loosen the hose clamp (if present), then twist and pull the hose off the nipple.
4
Unbolt the solenoid. Using a 10mm socket or wrench, remove the mounting bolt(s). Keep the bolt for reinstallation.
5
Install the new solenoid. Position it in the same orientation, bolt it in place, reconnect the hose (secure with clamp), and plug in the electrical connector until you hear a click.
6
Test operation. Start the engine and check for leaks. Clear any stored trouble codes with an OBD2 scanner. A short test drive will confirm the EVAP system is functioning correctly.

Package Includes

1 × Vapor Canister Purge Solenoid Valve — brand new, factory tested, as shown in product images

Search Terms

vapor canister purge valve 14935-AM600 14935-AM60A 14935-AM60B 14935-JF00B 14935-JF00A EVAP purge solenoid Nissan vapor canister valve Infiniti FX35 purge valve FX45 vapor canister P0441 repair P0443 replacement Altima 3.5L EVAP Pathfinder 5.6L purge solenoid Direct fit EVAP valve OEM replacement purge valve Nissan 350Z vapor solenoid G35 check engine light fix

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×