Sale
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03
Click to zoom in

Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03

Toyota
U5.260605.087
In stock
Exterior Accessories
$26.51 $19.93
$19.93

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Door Handles & Components

Rear Sliding Beige Door Handle Passenger or Driver Side For Sienna Toyota 98-03

Direct Replacement OEM Quality 2-Year Warranty IP67 Waterproof Easy Installation

Product Overview

The rear sliding door handle on your Toyota Sienna is one of the most frequently used entry points — especially for families loading kids, groceries, or gear. Over time, exposure to sun, heat, moisture, and daily wear can cause the factory handle to crack, fade, or become brittle. A broken handle not only makes it difficult to open the sliding door from the outside, but it also compromises the security of your vehicle and can leave passengers stranded. Replacing it promptly restores full function and peace of mind.

This rear sliding door handle is manufactured as a direct replacement for the original equipment, matching factory dimensions, mounting points, and clip locations for a seamless fit on both the passenger and driver sides of your 1998-2003 Toyota Sienna. Crafted from high-grade ABS plastic with a polished beige finish, it resists scratching, staining, and UV fading — keeping your van looking clean and well-maintained. The included OE numbers 80359 and 69230-08020-C0 confirm precise compatibility with the original part.

Whether your current handle has snapped off, the latch mechanism is no longer engaging, or you simply want a fresh, color-matched replacement, this handle delivers an affordable, durable solution. Installation is straightforward with basic hand tools and the included screws — no special modifications or drilling required. Backed by a 2-year manufacturer warranty and 24/7 customer support, this is a reliable, hassle-free fix for your Sienna's sliding door.

Key Features & Benefits

✔ Precise OEM-Spec Fitment
Engineered to original factory dimensions for the 1998-2003 Toyota Sienna rear sliding door — mounts using existing clips and screws with zero modification required.
✔ High-Grade ABS Construction
Built from impact-resistant ABS plastic that withstands temperature extremes, resists cracking, and holds up against daily use better than many original handles.
✔ Scratch & Stain-Resistant Finish
The polished beige surface repels dirt, road grime, and minor abrasions — keeping the handle looking fresh even after years of use by kids, groceries, and cargo.
✔ IP67 Waterproof Protection
Rated fully dust-tight and protected against temporary immersion in water — no worries about rain, car washes, or humidity compromising the handle's integrity.
✔ Dual-Side Versatility
Designed to fit both the left and right rear sliding doors — order one for either side or a pair for a perfectly matched set across your Sienna's rear entry points.
✔ 2-Year Warranty & Lifetime Support
Your purchase is protected by a full 2-year manufacturer warranty plus 24/7 online customer service — install with total confidence.

Product Specifications

Brand Unbranded (OEM Replacement)
Product Type Rear Sliding Door Handle
OE/OEM Part Numbers 80359, 69230-08020-C0
Position on Vehicle Exterior Rear — Left / Right (Driver & Passenger Side)
Color / Finish Beige, Polished
Material High-Grade ABS Plastic
Attachment Type Integrated Clips + Screws
Shape Rectangular (Factory Contour)
Waterproof Rating IP67 — Dust-tight & Immersion-Protected
Fitment Type Direct Replacement — No Modification Needed
Universal Fitment No — Engineered for 1998-2003 Toyota Sienna Only
California Prop 65 Warning applies — Exterior Door Handle
Warranty 2-Year Manufacturer Warranty
Items Included in Box 1× Door Handle, Mounting Screws

Vehicle Fitment & Compatibility

Important: Verify your vehicle's year, model, and door configuration before purchasing. Cross-reference your original part with OE numbers 80359 or 69230-08020-C0 to confirm exact compatibility. This handle fits both the left (driver) and right (passenger) rear sliding doors.

Toyota

Sienna 1998 — All Trims
Sienna 1999 — All Trims
Sienna 2000 — All Trims
Sienna 2001 — All Trims
Sienna 2002 — All Trims
Sienna 2003 — All Trims

Installation Guide

Difficulty: Easy  |  Estimated Time: 20-30 minutes per door  |  Tools Required: Trim panel removal tool or flathead screwdriver, Phillips-head screwdriver, and a small pick or awl (optional). No special mechanical experience needed — this is a straightforward swap that most DIYers can handle in the driveway.

1
Open the sliding door fully. Pull the door all the way back so you have unrestricted access to the interior door panel and the exterior handle mounting area.
2
Remove the interior door panel. Using a trim removal tool, carefully pry off the panel around the edges to release the clips. Disconnect any wiring harnesses (power window/lock) and set the panel aside.
3
Access the handle mounting screws. Peel back the vapor barrier slightly to reach the handle area. Locate the two or three screws securing the handle from behind the door skin — remove them with a Phillips-head screwdriver.
4
Detach the old handle from outside. Go to the exterior of the door and gently pull the old handle outward. Guide it past the latch rod if necessary. Some handles require a slight twist to release — take care not to bend the connecting rod.
5
Install the new handle. Position your replacement beige handle from the outside, feeding the latch rod through the lever eye. Press the handle flush against the door skin — it should seat firmly. Reinstall and tighten the mounting screws from inside the door cavity.
6
Reassemble and test. Reattach the vapor barrier with tape, reconnect any wiring, and snap the interior door panel back into place. Test the handle several times from both inside and outside to ensure smooth operation and secure latching.

Package Includes

1 × Rear Sliding Door Handle — Beige, polished ABS, for left or right side (as pictured)
1 × Set of Mounting Screws — Factory-match hardware for secure installation

Search Terms

Toyota Sienna door handle rear sliding door handle Sienna 98 99 00 01 02 03 69230-08020-C0 80359 exterior door handle replacement beige door handle Sienna passenger side sliding door handle driver side sliding door handle ABS exterior handle broken door handle fix sliding door latch handle Toyota Sienna rear door parts direct fit door handle IP67 waterproof handle scratch resistant door handle OEM replacement Sienna minivan sliding door handle

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×