Sale
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair
Click to zoom in

For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair

Chrysler
U5.260605.038
In stock
Exterior Accessories
$24.62 $18.51
$18.51

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior & Bumper Accessories

For CHRYSLER 2011-2020 300 Front Brackets Bumper Support Pair L&R Retainer Pair

Direct Replacement OEM Spec – OE 57010745AF / 57010744AE Pair (Left + Right) No Drilling Required 90-Day Warranty

Product Overview

Your Chrysler 300’s front bumper relies on sturdy support brackets to keep it properly aligned and securely attached to the vehicle frame. Over time, these plastic brackets can crack, warp, or break due to road impacts, temperature extremes, or normal wear. When they fail, you may notice a sagging or loose bumper, uneven panel gaps, or increased vibration while driving — compromising both appearance and safety.

This AUXITO replacement pair is manufactured to OEM specifications using high-quality ABS plastic, matching the fit, form, and function of the original Chrysler parts (OE #57010745AF / 57010744AE). They are designed as a direct bolt-on upgrade — no modification, drilling, or special tools required. The brackets restore bumper rigidity, absorb road vibration, and help protect the front end from further damage.

Perfect for owners of 2011-2020 Chrysler 300 sedans looking for an affordable, durable fix. Whether you’re replacing damaged brackets or refreshing a used vehicle, this pair provides a cost-effective solution without sacrificing quality. Installation is straightforward for DIYers and professionals alike, getting your bumper back to factory alignment in under an hour.

Key Features & Benefits

✔ Direct OEM Replacement
Engineered to match Chrysler’s original brackets — identical dimensions, mounting points, and curvature for a perfect fit without any adjustments.
✔ Durable ABS Material
High‑strength ABS plastic resists impact, corrosion, and temperature swings. Won’t rust or degrade like metal alternatives, ensuring long‑term reliability.
✔ No Drilling or Modifications
Install using the existing factory holes and hardware. Simple bolt‑on process saves time and eliminates guesswork — ideal for DIY enthusiasts.
✔ Vibration Reduction & Bumper Support
Provides critical structural support to the front bumper, minimizing shaking and rattling over rough roads. Helps keep the bumper aligned and secure.
✔ Complete Pair – Left & Right
Includes both driver and passenger side brackets so you can replace them as a set for balanced performance and appearance. Saves you from sourcing the second side separately.
✔ Cost‑Effective Quality
Lean manufacturing delivers OE‑grade fit and finish at a fraction of the dealer price. Backed by a 90‑day warranty and AUXITO’s lifetime support.

Product Specifications

Brand AUXITO
Material ABS Plastic
Color Black (Painted)
Finish Painted Textured
Placement on Vehicle Front, Left & Right (Lower Bumper Support)
Fitment Type Direct Replacement – No Modification
OE/OEM Part Number 57010745AF, 57010744AE
Interchange Part Numbers 57010745AF, 57010744AE
Manufacturer Warranty 90 Days
Country of Origin China
Package Quantity 2 Brackets (Left + Right)

Vehicle Fitment & Compatibility

Important: Always verify your vehicle’s OE part numbers (57010745AF / 57010744AE) before purchasing. This pair is designed exclusively for the 2011–2020 Chrysler 300 with the standard front bumper. Does not fit SRT8, 300M, or other models without cross‑reference.

Chrysler

2011 Chrysler 300
2012 Chrysler 300
2013 Chrysler 300
2014 Chrysler 300
2015 Chrysler 300
2016 Chrysler 300
2017 Chrysler 300
2018 Chrysler 300
2019 Chrysler 300
2020 Chrysler 300

Installation Guide

Difficulty: Moderate — Estimated Time: 30–60 minutes. Tools needed: socket set (10mm, 13mm), trim removal tool, flathead screwdriver, and a pry bar. Always work on a level surface and wear safety glasses.

1
Remove the front bumper cover. Carefully pry off the plastic push‑pins and screws along the top edge, wheel wells, and underbelly. Disconnect any fog light connectors if equipped. Lower the bumper cover to access the brackets.
2
Locate the old brackets. The brackets are mounted to the chassis rail ends on both left and right sides. They will be behind the bumper reinforcement bar.
3
Remove the old brackets. Using a socket wrench, unbolt the two or three fasteners securing each bracket. Gently wiggle the bracket free; it may be stuck due to age or corrosion.
4
Install the new brackets. Place the new AUXITO bracket into position (note: left and right are mirror images). Align the mounting holes with the chassis points. Hand‑tighten the bolts, then torque to factory spec (typically 18–22 ft‑lbs).
5
Reattach the bumper cover. Lift the bumper back into place, ensuring the brackets align with the corresponding slots on the cover. Secure all fasteners (screws, push‑pins, bolts). Reconnect any electrical connectors.
6
Final inspection. Gently push on the bumper to confirm it is secure and gap is even. Test fitment by checking panel alignment. Drive a short distance and listen for any rattles — if present, re‑tighten bolts.

Package Includes

2 × Front Bumper Brackets (Left & Right) — As shown in product images. Matching black painted finish. No additional hardware included; reuse OEM bolts.

Search Terms

Chrysler 300 bumper bracket 57010745AF 57010744AE front bumper support bracket Chrysler 300 2011-2020 left right bracket pair bumper retainer clip ABS plastic bracket direct replacement bumper part Chrysler 300 front end support OEM bumper bracket AUXITO 300 bracket bumper alignment bracket no drilling bumper fix Chrysler 300 lower bumper bracket pair bracket set bumper support left right 2019 Chrysler 300 bracket

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×