Sale
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior
Click to zoom in

Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior

Mitsubishi
U5.260605.013
In stock
Exterior Accessories
$28.41 $21.36
$21.36

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Door Handles

Fit 2004-11 Mitsubishi Endeavor Front Rear Left Right Door Handle Black Exterior

Direct Replacement Durable Textured Plastic Scratch‑Resistant Easy Installation 2‑Year Warranty

Product Overview

Your vehicle’s exterior door handles are one of the most frequently touched components. Over time, OEM handles can crack, fade, or simply break, leaving you unable to open the door from the outside. A broken handle not only compromises convenience but also security — it’s a failure point that needs immediate attention.

This set of AUXITO door handles is engineered to match the original Mitsubishi Endeavor specifications exactly. Manufactured from high‑quality, impact‑resistant plastic with a textured black finish, these handles provide the same look and feel as the factory parts. They are scratch‑resistant, UV‑stable, and built to withstand years of daily use in all weather conditions.

Designed as a direct bolt‑on replacement, no drilling or modification is required. Choose the quantity you need — 1, 2, or 4 handles — to replace just one or all four exterior handles on your 2004‑2011 Mitsubishi Endeavor. Backed by a 2‑year manufacturer warranty, this is a reliable, cost‑effective solution that restores full functionality to your doors.

Key Features & Benefits

✔ OEM Direct Replacement
Precisely replicates the factory design and dimensions of your Mitsubishi Endeavor handles. No modifications, adapters, or special tools needed — simply swap out the old part.
✔ Durable Textured Plastic
Made from high‑grade engineered polymer that resists cracking, warping, and fading. The textured surface provides a secure grip and matches the original factory feel.
✔ Scratch‑Resistant Finish
The black matte coating is treated to resist scratches from keys, rings, and everyday contact, keeping your handles looking fresh for years.
✔ Easy Screw‑On Installation
Attaches directly using the existing mounting points and screws. A straightforward DIY job that can be completed in under 30 minutes per door with basic hand tools.
✔ Flexible Quantity Options
Available as a single handle (front or rear, left or right) or as a complete 4‑piece set for full vehicle coverage. Buy exactly what you need without waste.
✔ 2‑Year Warranty
All AUXITO handles are backed by a 2‑year manufacturer warranty against material and workmanship defects, giving you peace of mind with every purchase.

Product Specifications

Brand AUXITO
Material High‑quality plastic (engineered polymer)
Color / Finish Black / Textured matte
Placement Exterior – Front Left / Front Right / Rear Left / Rear Right
Attachment Type Screw‑on (direct bolt‑on)
OE / OEM Part Numbers Front Left: MR987491, MI1310117
Front Right: MR987492, MI1311117
Rear Left: MR987493
Rear Right: MR987494
Interchange Part Numbers MR987492, MI1311117, MR987491, MI1310117, MR987493, MR987494
Quantity Options 1 / 2 / 4 handles (choose your combination)
Fitment Type Direct Replacement (non‑universal)
Shape Cupped (ergonomic grip)
Manufacturer Warranty 2 Years
Country of Manufacture China

Vehicle Fitment & Compatibility

⚠ Important: Always verify your vehicle’s original equipment (OE) part number against the numbers listed above. This handle is designed specifically for the Mitsubishi Endeavor. If your vehicle is not listed below, please confirm fitment before ordering.

Mitsubishi

Endeavor 2004
Endeavor 2005
Endeavor 2006
Endeavor 2007
Endeavor 2008
Endeavor 2009
Endeavor 2010
Endeavor 2011

Installation Guide

Difficulty: Intermediate — most DIYers can complete this in 20‑40 minutes per door. Tools needed: trim removal tool, Phillips screwdriver, T‑20 Torx driver (if equipped), and a flat‑head screwdriver for clip removal.

1
Remove the door panel. Using a trim removal tool, carefully pry off the interior door handle bezel and any screw covers. Remove all visible screws securing the door panel, then lift the panel upward and disconnect the electrical connectors (power locks, windows). Set the panel aside.
2
Peel back the vapor barrier. Gently pull the plastic moisture barrier away from the door opening to access the handle mechanism. Tape it out of the way if needed.
3
Disconnect the linkage rods. Locate the outer handle rod and locking rod. Use a flat‑head screwdriver to gently pry the rod clips off the handle lever. Slide the rods out of the old handle.
4
Remove the old handle. From inside the door, remove the two or three screws (usually 10mm or Torx) that hold the outer handle in place. Push the handle outward and pull it through the door skin.
5
Install the new AUXITO handle. Insert the new handle from the outside, aligning the screw holes. Secure it with the original screws. Reattach the linkage rods by pressing the clips back onto the handle lever until they snap into place.
6
Reinstall the door panel. Replace the vapor barrier and reconnect all electrical connectors. Line up the door panel and press it back into place, inserting all screws. Reattach the interior handle bezel and test the exterior handle operation before closing the door.

Package Includes

1 × Outside Door Handle (if ordering a single)
2 × Outside Door Handles (if ordering a pair)
4 × Outside Door Handles (if ordering the complete set)
Handles are sold as shown in the product images. Mounting screws and linkage clips are reused from your original vehicle.

Search Terms

Mitsubishi Endeavor door handle 2004-2011 Endeavor exterior handle MR987491 MI1310117 MR987492 MI1311117 MR987493 MR987494 AUXITO door handle black exterior door handle plastic door handle textured handle front left door handle front right door handle rear door handle replacement Mitsubishi Endeavor parts OE replacement handle screw-on door handle

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×