Sale
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST
Click to zoom in

License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST

Dodge
U5.260605.123
In stock
Exterior Accessories
$47.36 $35.61
$35.61

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

License Plate Bracket • Front Bumper Mount

License Frame Plate Bracket Front Holder 1997-2001 Dodge Ram for 1500 Laramie,ST

Direct Replacement Pre-Drilled Holes OE 55295455AE ABS Plastic 2-Year Warranty

Product Overview

Your front license plate is more than just a legal requirement — it's a visible part of your truck's front-end appearance. When the factory bracket cracks, warps from sun exposure, or simply breaks off after years of road vibration, your plate can rattle, hang loosely, or fall off entirely. This AUXITO License Plate Bracket is a direct-fit front holder designed specifically for 1997–2001 Dodge Ram 1500 Laramie and ST models, restoring a clean, secure mount that keeps your plate firmly in place and properly displayed.

Manufactured from high-quality ABS plastic, this bracket resists rust, corrosion, and UV degradation far better than many original-equipment units. It matches the factory contour and bolt pattern exactly, so you get a seamless replacement without any modifications. Pre-drilled holes line up with your Ram's front bumper mounting points, and the textured black finish blends in naturally with the surrounding trim. With OE part number 55295455AE cross-referenced, you can install with confidence knowing this is built to OEM specifications.

Whether you're replacing a damaged bracket, sprucing up a daily driver, or completing a restoration project, this bracket delivers the durability and fitment you expect from a quality aftermarket component. The screw-on attachment takes just minutes to install with basic hand tools, and the 2-year manufacturer warranty gives you peace of mind. It's the straightforward, affordable fix for a missing or broken front plate holder on your second-gen Ram.

Key Features & Benefits

✔ Direct Replacement — No Drilling Required
Engineered to match the original factory bracket exactly, this unit bolts on using existing mounting points. No cutting, drilling, or modifications means you can have it installed in minutes and get back on the road.
✔ Durable ABS Plastic Construction
Unlike metal brackets that can rust or corrode, this high-quality ABS plastic bracket is impervious to moisture, road salt, and UV rays. It won't peel, flake, or degrade over time — holding your plate securely for years to come.
✔ Pre-Drilled Holes for Fast Install
The bracket arrives with precisely positioned holes that align perfectly with your Dodge Ram's front bumper. Simply line it up, insert the screws, and tighten — no measuring or guesswork required.
✔ OE-Matched Fit for 1997–2001 Ram 1500 Laramie / ST
Tested and confirmed to fit the front bumper contours of second-generation Ram 1500, 2500, and 3500 models. Covered sub-trims include Laramie, ST, and WS — so you get a bumper-specific fit every time.
✔ Sleek Black Finish Blends Seamlessly
The matte black texture matches the factory bumper trim and doesn't stand out. It gives your front plate a clean, integrated look that maintains your truck's original appearance.
✔ Backed by a 2-Year Manufacturer Warranty
AUXITO stands behind this bracket with a 2-year warranty against defects. If you have any issues, their after-sales team responds within 12–24 hours — no hassle, no restocking fees.

Product Specifications

Brand AUXITO
Type License Plate Holder Bracket
Placement on Vehicle Front (Bumper Mount)
Material High-Quality ABS Plastic
Color Black (Textured Matte)
Attachment Type Screw-On
Holes Pre-Drilled
Fitment Type Direct Replacement
Number of Pieces 1
Item Length 12.6 in (32 cm)
Item Height 6.4 in (16.3 cm)
OE / OEM Part Number 55295455AE , CH1068108
Interchange Part Number 55295455AE , CH1068108
Universal Fitment No (Vehicle-Specific)
Country of Origin China
Manufacturer Warranty 2 Years

Vehicle Fitment & Compatibility

⚠ Important: Verify your vehicle's trim level and year against the fitment list below. This bracket is not universal — it is designed exclusively for the specified Dodge Ram generations. Always cross-reference your factory part number (OE 55295455AE) to confirm compatibility before ordering.

Dodge

1994–1996 Ram 1500 Base
1997–2001 Ram 1500 Laramie
1997–2001 Ram 1500 ST
1997–2001 Ram 1500 WS
1994–2002 Ram 2500 Base
1994–2002 Ram 3500 Base

Installation Guide

Difficulty: Easy — Estimated Time: 10–15 minutes — Tools Needed: Phillips screwdriver or socket wrench (10mm). No drilling, cutting, or specialized skills required. This direct-fit bracket replaces your old or missing front license plate holder in just a few simple steps.

1
Remove the Old Bracket (if present). Unscrew the two or four mounting bolts holding the factory bracket to the front bumper. Set the old bracket and hardware aside — you may reuse the screws if they are in good condition.
2
Clean the Mounting Surface. Wipe the bumper area where the bracket sits to remove dirt, grime, and old adhesive residue. A clean surface ensures the bracket sits flush and the screws tighten securely.
3
Align the New Bracket. Hold the AUXITO bracket up to the front bumper, lining up the pre-drilled holes with the corresponding threaded holes on your Ram's bumper. The bracket should sit level and centered.
4
Insert and Tighten the Screws. Place the mounting screws (supplied or reused) through the bracket holes and into the bumper threads. Tighten by hand first, then use your screwdriver or socket to snug them down — avoid over-torquing to prevent cracking the plastic.
5
Attach Your License Plate. Position your license plate over the bracket's plate mounting holes. Secure it with the plate screws or bolts (not included — use standard plate hardware). Make sure the plate is straight and tightly fastened.
6
Final Inspection. Give the bracket and plate a gentle tug to confirm everything is secure. Check that the plate is not obstructing any lights or sensors. Enjoy your clean, properly mounted front plate.

Package Includes

1 × Front License Plate Bracket — Pre-drilled black ABS bracket as shown in product images (mounting hardware not included)

Search Terms

license plate bracket front plate holder Dodge Ram 1500 license plate Ram 2500 front bracket Ram 3500 plate mount 55295455AE CH1068108 1997 Dodge Ram plate bracket 1998 Ram 1500 front holder 1999 Ram Laramie plate mount 2000 Ram ST front bracket 2001 Ram 1500 license frame AUXITO license bracket ABS plastic plate holder direct replacement bracket front bumper plate mount Dodge Ram tag bracket OEM 55295455AE replacement

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×