Sale
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger
Click to zoom in

2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger

Dodge
U5.260605.141
In stock
Exterior Accessories
$36.95 $27.78
$27.78

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Replacement Parts – Bumper Support

2PCS Rear Left+Right Side Bumper Support Bracket Fit 2008-2021 Dodge Challenger

Direct Fit OEM Replacement Left+Right Pair 3-Year Warranty

Product Overview

Your Dodge Challenger’s rear bumper is held securely in place by two support brackets – one on each side, mounted behind the bumper cover. Over time, exposure to road debris, minor impacts, and temperature cycles can cause these brackets to crack, warp, or lose their grip. A loose or misaligned bumper not only compromises the car’s appearance but also reduces crash protection and can lead to further damage to the bumper cover and fascia.

This AUXITO rear bumper support bracket set is a direct replacement for the original factory brackets (OEM numbers 68024343AD and 68024342AD). Manufactured from high‑impact ABS plastic with a polished black finish, each bracket is engineered to match the exact contours and clip points of your 2008‑2021 Challenger. The result is a secure, rattle‑free fit that restores the bumper’s proper alignment and impact‑absorption capability.

Whether you’re repairing after a fender bender or upgrading worn components, this pair of brackets offers a cost‑effective, durable solution. The clip‑on design makes installation straightforward with basic hand tools, and the set includes both left‑ and right‑side brackets so you can complete the job in one go. Backed by a 3‑year manufacturer warranty, it’s the smart choice for maintaining your Challenger’s rear end.

Key Features & Benefits

✔ OEM‑Spec Direct Fit
Precisely replicates the original bracket geometry and mounting points – no drilling, trimming, or adapters required. Installs in minutes using the same factory clips.
✔ Impact‑Resistant ABS Construction
Hardened ABS plastic resists cracking, corrosion, and road salt. The smooth, polished finish won’t rust or peel, giving you long‑term reliability even in harsh climates.
✔ Complete Pair – Left & Right
Both rear bumper support brackets included in one package. Replacing both sides simultaneously ensures even support and prevents future alignment issues.
✔ Scratch‑Resistant Surface
The bracket’s durable coating resists abrasion during installation and daily driving, maintaining a clean look behind your bumper cover.
✔ 3‑Year Warranty & Budget‑Friendly
AUXITO stands behind this part with a 3‑year warranty against defects. You get OEM‑level quality at a fraction of the dealer price – an economical choice for any repair.

Product Specifications

Brand AUXITO
Part Name Bumper Support Bracket (Left & Right)
Placement on Vehicle Left, Right, Rear, Upper
OE / Interchange Part Numbers 68024343AD, 68024342AD
Material ABS Plastic
Color / Finish Black / Polished
Attachment Type Clip‑On
Fitment Type Direct Replacement
Bundle / Quantity 2 brackets (left + right)
Warranty 3 Years
Country of Origin China
Package Weight 245 g (approx.)
Package Dimensions 25 x 20 x 7 cm

Vehicle Fitment & Compatibility

⚠ Important: Verify that your Challenger uses the OE numbers 68024343AD (left) and 68024342AD (right) before purchasing. These brackets are designed for the upper rear bumper cover support.

Dodge

Challenger (2008–2021) – All trims
Challenger SXT / GT / R/T / Scat Pack / SRT Hellcat / SRT Demon

* Not compatible with 2022+ models or vehicles with aftermarket widebody conversions without verification.

Installation Guide

This is a straightforward clip‑on replacement that typically takes 30–45 minutes. You’ll need a trim removal tool, a 7mm socket or screwdriver, and a flashlight. No specialized mechanical skills are required – just patience to avoid scratching the bumper cover.

1
Remove the rear bumper cover. Unbolt or unclip the cover from the wheel well liners and lower edge. Gently pull it away from the car, taking care not to break any retaining clips.
2
Locate the old support brackets. They are attached to the inner side of the bumper beam – one on the left, one on the right. Note how they clip onto the beam.
3
Unclip the old bracket. Use a flat trim tool to pry the clip tabs outward while pulling the bracket free. If it breaks, remove any remaining pieces.
4
Clean the mounting area. Wipe away dirt and debris from the bumper beam. Ensure the clip holes are clear so the new bracket snaps in fully.
5
Install the new AUXITO bracket. Align the bracket with the mounting studs or holes on the beam. Press firmly until you hear a click – verify it is seated evenly.
6
Reattach the bumper cover. Position the cover over the brackets and press the outer clips back into place. Reinstall the wheel well fasteners and lower bolts. Test for proper alignment before final tightening.

* For a detailed workshop manual, consult your vehicle’s service information or a professional mechanic.

Package Includes

1 × Left Rear Bumper Support Bracket – as shown in product images
1 × Right Rear Bumper Support Bracket – as shown in product images
Total: 2 brackets (left + right) – no additional hardware required.

Search Terms

Dodge Challenger bumper bracket 68024343AD 68024342AD rear bumper support bumper reinforcement beam bumper cover spacer 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 Challenger bracket left right AUXITO bumper bracket direct replacement clip-on OEM 68024343AD 68024342AD rear bumper retainer set bumper bracket pair plastic bumper support Challenger rear bumper fix bumper alignment bracket front bumper? (rear only) aftermarket replacement

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×