2pcs Cars DRL LED Daytime Running Lights Auto Flowing Turn Signal Guide Strip Headlight Accessories

Upgrade your vehicle's visibility and style with this 2-piece set of LED daytime running lights featuring an integrated flowing turn signal function. Designed as a flexible guide strip that mounts directly onto your existing headlights, these lights serve a dual purpose — they illuminate as bright DRLs during daytime driving and pulse in a dynamic sequential pattern when you activate your turn signal. This combination enhances your car's presence on the road while delivering an unmistakable warning to nearby drivers, improving safety in all conditions.

Constructed from high-quality silicone material, each strip is durable, weather-resistant, and built to withstand the vibrations and temperature changes that come with daily driving. The LEDs deliver consistent brightness with low power draw, and the strip is available in three lengths (30cm / 45cm / 60cm) and six color options (White, Ice Blue, Blue, Red, Yellow) so you can match or accent your vehicle's look. At just 0.2kg per set, installation is simple and requires no heavy hardware.

The paste-on installation method means you can attach the strip directly to the headlight housing without drilling or disassembly — ideal for DIY enthusiasts who want a clean, professional look. Once installed, the lights connect to your 12V electrical system and work with most car models, making this a truly universal upgrade. Whether you're aiming for a sharper modern appearance or an extra layer of safety, these DRL turn signal strips deliver exceptional value.

This universal DRL strip is designed for 12V vehicles and fits a wide range of makes and models. Below are common compatible brands and suggested usage scenarios.

Tip: Choose 30 cm for compact headlights, 45 cm for mid-size cars, and 60 cm for larger trucks or SUVs.

1. 1 Clean the headlight surface — Thoroughly wash and dry the area where the strip will attach. Use isopropyl alcohol to remove wax, grease, or residue for maximum adhesive bond.
2. 2 Measure and test fit the strip — Hold the strip along the headlight edge to confirm length and position. Trim if necessary (30/45/60 cm options). Choose a spot that does not block the main headlight beam.
3. 3 Peel off the adhesive backing — Remove the protective film from the double-sided tape on the back of the strip. Avoid touching the adhesive to keep it clean.
4. 4 Press firmly into position — Carefully place the strip along your chosen line and press evenly for 30–60 seconds. Apply light pressure along the entire strip to ensure full contact.
5. 5 Connect to 12V power — Route the wires neatly behind the headlight and connect to your vehicle's 12V DRL or turn signal circuit (use a fuse tap or splice connector). Observe correct polarity (red = positive, black = negative).
6. 6 Test all functions — Turn on the ignition to verify the DRL illuminates. Activate the turn signal to confirm the flowing sequence. Check both sides and secure any loose wiring with zip ties.