Sale
Universal LED Side Marker Cleaned
Click to zoom in

Universal 10PCS LED Side Marker Clearance Lights Red Amber

Universal
U5-20260525-358119578295
In stock
Lighting Accessories
$26.70 $21.36
$21.36

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Lighting & Accessories

LED 10PCS LIGHTS MARKER CLEARANCE SIDE RED AMBER TRAILER TRUCK RV CARAVAN LIGHT

10-Piece Full Kit CAN Bus Ready 12V DC LED 2-Year Warranty Universal Fitment

Product Overview

Visibility and compliance are non-negotiable when you are hauling heavy loads or navigating low-light conditions. This 10-piece LED marker and clearance light kit provides the essential side and rear illumination required for safe operation of trailers, trucks, RVs, and caravans. When standard incandescent markers fail—leading to burnt-out bulbs and diminished visibility—these high-output LEDs ensure you remain seen by other motorists, dramatically reducing the risk of side-swipe incidents and potential citations.

Engineered for demanding environments, each light features a rugged, weather-resistant housing and advanced LED chips that deliver instant-on brightness without draining your electrical system. The integrated CAN bus compatibility guarantees error-free operation with modern vehicle computers, eliminating hyper-flash or fault codes commonly experienced with aftermarket lighting. With a low 1.2W draw per unit, this kit is an intelligent upgrade over traditional filament-based lights for improved durability and energy efficiency.

This comprehensive kit includes five Red lights for rear identification and five Amber lights for side or front clearance, providing a complete solution in one convenient package. The universal 2-wire design and included mounting hardware make installation straightforward for both seasoned mechanics and DIY owners, offering a professional-grade lighting upgrade that enhances both safety and the overall look of your vehicle.

Key Features & Benefits

✔ Complete 10-Piece LED Kit
Includes 5 Red and 5 Amber lights, matching SAE/DOT color standards for rear and side identification. This saves you the hassle of sourcing individual units and ensures a uniform, professional lighting setup.
✔ Ultra-Low Power Consumption
Drawing only 1.2W per light, these LEDs place minimal strain on your vehicle's charging system. This is especially beneficial for trailers and overlanding setups with limited battery capacity or solar power.
✔ Advanced CAN Bus Compatibility
Built-in smart circuitry prevents hyper-flashing and phantom draw errors on modern vehicles. You get a simple plug-and-play upgrade without the need for additional load resistors.
✔ Durable & Weatherproof Construction
The sealed lens and robust housing effectively resist moisture, road salts, dust, and corrosion. This ensures reliable, long-lasting performance in extreme weather conditions, from freezing winters to scorching summers.
✔ Universal Fitment with Easy Installation
The compact 2.5" x 1.1" oval profile and standard 1.8" mounting centers fit a wide range of applications. The simple 2-wire hookup (Black = Positive, Red/Yellow = Negative) and included screws make installation fast.
✔ Extended 2-Year Manufacturer Warranty
Backed by a comprehensive 2-year warranty, this kit offers peace of mind. The manufacturer's commitment to quality ensures you receive a reliable product built to last.

Product Specifications

Brand delightworld9 Professional
Type Side Clearance & Marker Lights
Quantity 10 PCS (5x Red, 5x Amber)
Lighting Technology LED (2 LEDs per light)
Operating Voltage 12V DC
Power Consumption 1.2W per light
Dimensions 2.5" x 1.1" x 0.7" (65.8 x 27.9 x 17.6 mm)
Hole to Hole Distance 1.8" (46 mm)
Wire Length 9.8" (250 mm)
Wire Polarity Black (+) / Red-Yellow (-)
Features CAN Bus Compatible
Manufacturer Warranty 2 Years
MPN CBD-R-Y-SRY-10PCS3
Country of Origin China

Vehicle Fitment & Compatibility

Important: Always verify your specific vehicle's wiring polarity and mounting center specifications (1.8") before installation. Check local regulations regarding the correct placement of Red (rear/side) and Amber (front/side) marker lights to ensure compliance.

Trailers & RVs

Utility Trailers
Boat Trailers
Horse Trailers
Travel Trailers
Fifth Wheels
Toy Haulers
Campers & Pop-ups

Trucks & SUVs

Ford F-Series / Super Duty
Ram 1500 / 2500 / 3500
Chevrolet Silverado / GMC Sierra
Toyota Tundra / Tacoma
Nissan Titan / Frontier
Jeep Wrangler / Gladiator
Ford Expedition / Explorer
Chevrolet Tahoe / Suburban

Commercial & Fleet Vehicles

Semi-Trucks & Tractors
Box Trucks & Cargo Vans
Flatbeds & Dump Trucks
Delivery Fleets
Service Bods & Utility Trucks

Motorhomes & Buses

Class A Motorhomes
Class C Motorhomes
Shuttle Buses
School Buses
Conversion Vans

Installation Guide

Difficulty: Beginner | Time: 30-60 minutes | Tools: Drill, 1.8" Hole Saw (or center punch), Wire Strippers, Crimpers, Screwdriver, Multimeter (recommended).

1
Prepare Mounting Surface. Thoroughly clean the area where the light will be mounted. Use the light as a template to mark the two screw holes (1.8" centers). Drill pilot holes if necessary to prevent cracking the mounting surface.
2
Route & Connect Wiring. Run the 9.8" lead wires to your vehicle's lighting harness. Using a multimeter, confirm the polarity of your vehicle's side light circuit. Connect the Black wire to Positive (+) and the Red/Yellow wire to Negative (-). Use heat shrink butt connectors or solder for a weatherproof connection.
3
Test Light Functionality. Before permanently mounting the light, temporarily connect it to the power source to verify the LED illuminates correctly. Confirm the Amber lights are positioned on the side/front and Red lights on the rear.
4
Secure the Light. Apply a small bead of silicone sealant around the back edge of the light body to act as an additional moisture barrier. Position the light over the mounting holes and fasten it using the provided screws. Tighten until snug—do not over-tighten, as this could crack the lens.
5
Repeat for Remaining Lights. Follow steps 1 through 4 for each of the 10 lights in the kit. Take your time to route wires cleanly and neatly, securing them away from moving parts or sharp edges with zip ties or wire looms.
6
Final System Test. Once all lights are installed and wired, perform a complete test of your vehicle's lighting system. Turn on the parking lights and hazard lights to ensure all marker and clearance lights function flawlessly together.

Package Includes

5× Red LED Oval Marker Lights — Pre-wired with mounting gasket for rear/side identification
5× Amber LED Oval Marker Lights — Pre-wired with mounting gasket for side/front clearance
20× Mounting Screws — Corrosion-resistant hardware for secure installation

Search Terms

side marker light clearance lights trailer lights truck cab lights RV lighting caravan lights LED marker lights amber side marker red tail light 12V LED light boat trailer accessories horse trailer lights utility trailer lights semi truck clearance 2.5 inch oval light identification lamps delightworld9 CBD-R-Y-SRY-10PCS3

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×