Sale
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007
Click to zoom in

Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007

Toyota
U5.260605.184
In stock
Exterior Accessories
$24.62 $18.51
$18.51

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Tailgate Liftgate Components

Liftgate Latch Rear Tailgate For Door Sequoia Toyota Handle Sienna 2001-2007

Direct Replacement OEM Ref: 69090-0C080 Easy Installation Waterproof IP67

Product Overview

The liftgate latch handle is a critical component of your Toyota Sequoia or Sienna’s rear access system. When you pull the handle, it releases the latch mechanism to open the tailgate or trunk. Over time, the internal plastic and metal parts can wear, crack, or break — leaving you unable to open your rear door or causing the latch to stick. A faulty handle is not only frustrating but also compromises the security of your cargo area.

This replacement liftgate latch handle is manufactured to meet or exceed OEM specifications (reference part numbers 69090-0C080 and 69090-08010). Constructed from high-grade ABS plastic with a polished black finish, it resists scratches, stains, and UV damage. The integrated clips ensure a secure, rattle-free fit, and the stainless-steel reinforcing insert guarantees long-lasting operation even after thousands of cycles. Waterproof IP67 sealing protects the internal mechanism from rain and car washes.

Designed as a direct bolt-on replacement for 2001–2007 Toyota Sequoia and 1998–2003 Toyota Sienna models, this handle requires basic hand tools and about 30 minutes to install. No modifications or special wiring are needed — simply remove the interior trim, disconnect the old handle, and install the new one using the included screws. Restore reliable tailgate operation and peace of mind without paying dealer prices.

Key Features & Benefits

✔ Direct OEM Fitment
Engineered to match the original dimensions of your Sequoia or Sienna — no drilling, cutting, or adapters needed.
✔ Scratch & Stain-Resistant Finish
The smooth black ABS surface resists daily wear, keeping your rear handle looking like new for years.
✔ Waterproof IP67 Sealing
Full protection against rain, snow, and car washes ensures reliable operation in all weather conditions.
✔ Long Service Life (>50,000 Cycles)
Tested for durability far beyond typical use — you get thousands of trouble-free openings and closings.
✔ Complete Kit with Screws
All necessary mounting hardware is included so you can finish the job in one trip to the garage.
✔ 2-Year Manufacturer Warranty
Your purchase is backed by a full two-year warranty against defects — buy with confidence.

Product Specifications

Brand Unbranded (High-Quality Aftermarket)
Type Liftgate Latch Handle Assembly
Placement on Vehicle Rear – Tailgate / Trunk (External)
Material ABS Plastic with Metal Reinforcement
Color / Finish Black, Polished
Attachment Type Clips + Screws (Included)
OE / OEM Part Numbers 69090-0C080, 69090-08010
Waterproof Rating IP67 (Dust-tight and protected against immersion)
Warranty 2 Years
Fitment Type Direct Replacement (Non-Universal)

Vehicle Fitment & Compatibility

Important: Always verify your vehicle’s OE part number matches 69090-0C080 or 69090-08010 before purchasing. For 2003 Toyota Sienna, please contact us to confirm compatibility before ordering.

Toyota Sequoia

Sequoia 4.7L V8 4WD AT Limited 2001–2007
Sequoia 4.7L V8 4WD AT SR5 2001–2007
Sequoia 4.7L V8 AT Limited 2001–2007
Sequoia 4.7L V8 AT SR5 2001–2007

Toyota Sienna

Sienna 3.0L CE 2000–2003
Sienna 3.0L CE Wagon 1998–2000
Sienna 3.0L LE 2000–2003
Sienna 3.0L LE XLE Wagon 1998–1999
Sienna 3.0L XLE 2000–2003

Installation Guide

Difficulty: Easy (1 out of 5)  |  Time: approximately 30 minutes  |  Tools required: Trim removal tool, Phillips screwdriver, 10mm socket wrench (optional). No special skills needed.

1
Access the interior trim. Open the tailgate. Use a trim removal tool to gently pry off the inner plastic panel covering the handle area. Set the panel aside.
2
Disconnect the electrical connector. If your vehicle has a switch or light integrated into the handle, locate the connector and press the release tab to separate it. Note the routing for reinstallation.
3
Remove the old handle. Use a Phillips screwdriver to remove the screws (typically two or three) securing the handle to the latch mechanism. Gently pull the handle out through the exterior opening.
4
Install the new handle. Feed the new handle’s mounting posts through the exterior holes from the outside. Align the screw holes and push firmly until the clips engage. Secure with the provided screws — do not overtighten.
5
Reconnect electrical wiring. Plug the connector back into the new handle — listen for a click. Tuck any excess wire into the cavity to prevent pinching.
6
Test and reassemble. Pull the handle to ensure smooth latch release. Reattach the interior trim panel by pressing the clips back into place. Close and open the tailgate several times to confirm proper operation.

Package Includes

1 × Rear Liftgate Latch Handle Assembly – Black ABS with metal reinforcement, as shown in product images
1 × Set of Mounting Screws – Compatible with factory holes
2-Year Warranty – Coverage against manufacturing defects

Search Terms

liftgate latch rear tailgate handle Toyota Sequoia 2001-2007 Toyota Sienna 1998-2003 69090-0C080 69090-08010 liftgate handle replacement rear door handle tailgate latch assembly Sequoia trunk handle Sienna rear latch ABS liftgate handle waterproof tailgate handle direct replacement handle Toyota 69090 tailgate handle screws included rear liftgate latch handle Sequoia Sienna cargo handle

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×