Sale
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair
Click to zoom in

For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair

Dodge
U5.260605.186
In stock
Exterior Accessories
$36.95 $27.78
$27.78

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Bumper & Body Components

For 2008-2021 Dodge Challenger Bumper Support Bracket Rear Left&Right Upper Pair

OEM Reference 68024343AD OEM Reference 68024342AD Left & Right Pair Upper Rear Brackets Direct Replacement

Product Overview

The rear bumper support brackets (upper pair, left and right) are critical components that secure the bumper cover to the vehicle's rear structure. Over time, these brackets can crack, warp, or break due to road vibrations, minor impacts, or corrosion. When they fail, the bumper cover may sag, rattle, or become misaligned, compromising both appearance and protection.

This AUXITO replacement set is precision-engineered to meet or exceed OEM specifications for the 2008–2021 Dodge Challenger. Manufactured from high-grade ABS plastic with a polished black finish, these brackets offer the same fit and function as the original parts (OE Numbers 68024343AD and 68024342AD). They provide a secure, rattle-free mounting solution that restores the factory look and safety performance of your Challenger's rear end.

Whether you're repairing damage from a minor rear-end bump or simply refreshing worn components, this pair of left and right upper brackets delivers an affordable, direct-fit upgrade. Installation is straightforward with basic hand tools — just clip on and bolt up. Backed by a 3-year manufacturer warranty, you can drive with confidence knowing your bumper is properly supported.

Key Features & Benefits

✔ Precision Direct Fit
Engineered to match original dimensions and mounting points for 2008–2021 Dodge Challenger — no drilling, cutting, or modifications required. Installs exactly like the factory parts.
✔ Durable ABS Construction
High-impact ABS plastic resists cracking, UV rays, and extreme temperatures. The polished black finish stays looking great and blends seamlessly with your existing bumper hardware.
✔ Complete Left & Right Set
This pair includes both upper rear brackets (driver and passenger side) so you can replace both aging units at once. Symmetrical support ensures even bumper alignment and eliminates uneven gaps.
✔ Scratch-Resistant & Clip-On Design
Smooth, scratch-resistant surface withstands daily wear. Simple clip-on attachment with factory-style snaps makes removal and reinstallation fast — no special tools needed.
✔ OEM-Grade Safety & Reliability
Restores the bumper's ability to absorb minor impacts and maintain proper position. Reduces risk of bumper separation and protects costly rear body panels from damage.
✔ 3-Year Warranty & Value Pricing
AUXITO backs these brackets with a 3-year manufacturer warranty. You get premium-quality replacements at a fraction of dealer cost — an economical solution without compromise.

Product Specifications

Part Name Bumper Support Bracket (Upper Pair)
Placement on Vehicle Left, Right, Rear, Upper
OEM / Interchange Part Numbers 68024343AD, 68024342AD
Material High-Grade ABS Plastic
Color / Finish Black, Polished
Attachment Type Clip-On / Mounting Screws
Fitment Type Direct Replacement
Items Included 2x Rear Bumper Retainer Set (Left & Right)
Packaging Weight 245 g (approx. 8.6 oz)
Warranty 3 Years

Vehicle Fitment & Compatibility

Important: Verify your vehicle's OE part numbers 68024343AD (right) and 68024342AD (left) before ordering. These brackets fit the upper rear bumper area. Always cross-reference with your existing part or VIN if uncertain.

Dodge

Challenger 2008–2021 (all trims: SXT, R/T, Scat Pack, SRT Hellcat, Demon, etc.)

Compatible with both coupe models. Does not fit convertible or other Chrysler/Dodge platforms. Confirm your vehicle's rear bumper design matches the upper bracket location shown in photos.

Installation Guide

Difficulty: Moderate (DIY)  |  Estimated Time: 30–45 minutes  |  Tools Required: Trim panel removal tool, 10mm socket/ratchet, flathead screwdriver, safety glasses.

1
Prepare the vehicle. Park on a level surface, apply the parking brake, and disconnect the negative battery terminal if working near electrical components. Remove any cargo from the trunk for easier access to rear trim.
2
Access the rear bumper area. Open the trunk and remove the rear interior trim panels (carpet, plastic covers) to expose the upper bumper mounting points. Use a trim tool to gently pry clips.
3
Remove the old brackets. Locate the left and right upper bumper support brackets. Remove any screws (typically 10mm bolts) and unclip the old brackets from the bumper cover and body panel. Inspect the area for rust or damage.
4
Install the new brackets. Position each new AUXITO bracket in the same orientation as the old one. Slide the clip-on ends into the bumper cover slots, then align with the body mounting holes. Secure with the original screws or new hardware (not included). Torque to 10–12 Nm.
5
Reinstall interior trim. Press the trunk trim panels back into place, ensuring all clips snap securely. Reconnect the battery if disconnected. Check for proper bumper alignment and clearance.
6
Test and finalize. Gently push on the bumper cover to ensure it feels secure and does not move excessively. Visually inspect both brackets for proper seating. Road test briefly to confirm no rattles or vibrations.

Package Includes

1 × Left Upper Rear Bumper Support Bracket — driver side (fits OE 68024342AD)
1 × Right Upper Rear Bumper Support Bracket — passenger side (fits OE 68024343AD)
Hardware (screws/clips) not included — may reuse original fasteners. Contents as shown in product images.

Search Terms

Dodge Challenger bumper bracket rear bumper support bracket 68024343AD 68024342AD upper bumper retainer bumper cover spacer rear bumper bracket pair Challenger 2008-2021 body part ABS bumper support direct replacement bracket bumper reinforcement beam AUXITO left right upper set rear bumper sag fix clip-on bumper bracket OEM replacement 68024343AD 68024342AD rear lower bumper support Challenger SRT Hellcat bracket

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×