Sale
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right
Click to zoom in

Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right

Subaru
U5.260605.187
In stock
Car Lighting
$45.47 $34.19
$34.19

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping overs $20

Item specifics

Exterior Lighting & Trim

Front Fog Bumper Molding Cover Light 2017-18 for Trim Forester Subaru Left Right

Direct Replacement Chrome Honeycomb Pair (Left + Right) 2-Year Warranty

Product Overview

The front fog light bumper molding cover on your Subaru Forester does more than just finish the look of the lower fascia — it shields the fog lamp assembly from road debris, moisture, and accidental impacts. Over time, these plastic trims can crack, fade, or pop loose from vibration, leaving your fog light exposed and your vehicle’s front end looking unfinished. Replacing them restores both protection and the crisp factory appearance.

This AUXITO pair includes both left and right chrome honeycomb trim covers, precision-molded to match the 2017–2018 Subaru Forester. They are manufactured from high-grade ABS/vinyl material that resists scratching, UV fading, and everyday wear. Each cover is a direct fit — no cutting, drilling, or splicing required — and installs using the original screw mounting points for a secure, rattle-free hold.

Whether you are replacing a damaged piece or upgrading to a more modern honeycomb style, these covers offer an affordable OE‑quality solution. The chrome finish adds a subtle accent that complements the Forester’s front grille and headlight bezels. Backed by a 2‑year warranty, you can count on lasting performance and easy installation in under 30 minutes.

Key Features & Benefits

✔ Precision Fitment for 2017–2018 Subaru Forester
Designed specifically for the Forester’s front bumper, these trims line up perfectly with the fog light housing and bumper contours — no gaps, no wobble.
✔ Chrome Honeycomb Style Upgrade
The bright chrome finish and honeycomb mesh add a sporty, modern touch that elevates the front-end appearance without looking aftermarket.
✔ Durable & Scratch-Resistant Material
Crafted from impact-resistant ABS/vinyl, these covers stand up to road grit, stone chips, and harsh weather while remaining easy to clean with just soap and water.
✔ Direct Replacement – No Mods Needed
Uses the factory screw holes and clips; simply remove the old trim and install the new one in minutes. No cutting, drilling, or special tools required.
✔ Complete Pair – Left & Right Included
This package contains both sides, so your Forester’s front fog lights will match perfectly and look symmetrical.
✔ 2‑Year Manufacturer Warranty
AUXITO stands behind this part with a two‑year warranty against defects, giving you peace of mind with every purchase.

Product Specifications

Brand AUXITO
Type Fog Light Trim / Bumper Molding Cover
Placement Front, Left & Right
Material ABS / Vinyl
Color Chrome (Honeycomb mesh)
Number of Pieces 2 (Left + Right)
OE/OEM Part Numbers 57708SG010, SU1046101, 57708SG000, SU1047101
Interchange Part Numbers 57708SG010, SU1046101, 57708SG000, SU1047101
Fitment Type Direct Replacement (screw mount)
Compatible Vehicles 2017–2018 Subaru Forester
Warranty 2 Years
Item Dimensions 11.9 x 2.6 x (approx. 3.5) in
Packaging Weight 126 g (4.4 oz)

Vehicle Fitment & Compatibility

Important: Please verify your vehicle’s original part number against the listed OE numbers (57708SG010, SU1046101, 57708SG000, SU1047101) before ordering. This trim set is designed exclusively for the 2017–2018 Subaru Forester and does NOT fit other Subaru models or Forester years.

Subaru

Forester (SJ) 2017–2018 – All trims

Installation Guide

Replacing the fog light trim covers is a straightforward job that most DIYers can complete in about 20 minutes. You will need a Phillips screwdriver or a small trim removal tool (if the originals are held with clips). No lifting or wheel removal is necessary.

1
Park & access the trim. Turn the steering wheel fully left or right to expose the front bumper area. No need to remove the bumper.
2
Remove the old trim. If secured by screws, unscrew them with a Phillips driver. If clip‑on, gently pry the trim away from the bumper using a trim removal tool, working from the outer edge inward.
3
Clean the mounting surface. Wipe away any dirt, wax, or old adhesive residue from the bumper recess where the new trim will sit.
4
Align the new trim. Place the AUXITO cover into position, making sure the honeycomb pattern is oriented correctly and the screw holes line up.
5
Secure the cover. Reinstall the factory screws (or push the clips firmly into place) until the trim sits flush with the bumper. Do not overtighten.
6
Repeat for the other side and test that both trims are secure. Step back and admire the refreshed front appearance!

Package Includes

2 × AUXITO Fog Light Trim Cover (Left & Right) — Chrome Honeycomb, as shown in product images

Search Terms

Subaru Forester fog light trim 2017 Forester fog light cover 2018 Forester bumper molding 57708SG010 SU1046101 57708SG000 SU1047101 AUXITO fog light bezel chrome honeycomb fog trim Forester front bumper cover fog lamp trim left right direct replacement fog light surround 2017 2018 Forester exterior accessory SJ Forester fog cover Subaru fog light bezel chrome bumper molding cover pair ABS vinyl fog trim easy install Forester trim

Will this item fit your vehicle?

To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.
If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
Read More
Read Less

If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.

Return Process

To return merchandise, please use one of the following methods:

Within 30 Days of Purchase

Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.

Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.

After 30 Days of Purchase

If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.

Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.

Refund Process

For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452

Customer Reviews

Your cart

×