For Lexus Trunk Gloss Black UX 200 Letter Logo Badge Emblem Car Replace F-Sport
-
Guaranteed Fitment
Always the correct part
-
In-House Experts
We know our products
-
Added Value
Mounting, Balancing
-
Wordwide Delivery
Free shipping overs $20
Item specifics
Product Overview
This Lexus UX 200 trunk letter logo badge in gloss black is the perfect way to restore, refresh, or customize the rear end of your vehicle. Designed as a direct replacement for the factory emblem, it gives your Lexus a clean, upscale appearance that stands out on the road. The 3D construction mimics the look and feel of an OEM part, ensuring your car maintains that premium, factory-finished aesthetic.
Crafted using advanced automotive badge-making technology, this emblem is lightweight yet substantial, and engineered to flex slightly for 100% adhesion even on moderately curved trunk surfaces. The gloss black finish resists fading, peeling, and UV damage, so it stays sharp wash after wash. A premium paint-safe adhesive provides long-term holding power — no foam tape that can weaken in heat or moisture. Backed by a 3-year indoor/outdoor guarantee, it’s built to survive extreme weather, road debris, and frequent car washes without lifting or cracking.
Installation is quick and frustration-free: simply peel off the backing, align the badge on a clean, dry surface, and press firmly. Whether you’re replacing a faded original emblem or updating the look of your UX 200 with the F-Sport-inspired gloss black treatment, this badge delivers an instant visual upgrade in minutes. No drilling, no special tools, and no professional help required.
Key Features & Benefits
- ✔ 3D Raised Emblem Design — Creates a premium, factory-matched look that adds depth and visual appeal to your trunk, making your Lexus stand out with an upscale, custom appearance.
- ✔ Automotive Paint-Safe Adhesive — No foam tape means no weakening over time; the adhesive bonds securely to clear coat and paint without causing damage, even during removal.
- ✔ Gloss Black Finish That Lasts — UV-resistant and fade-proof, this badge maintains its deep, rich gloss through sun, rain, snow, and repeated car washes, so it always looks freshly installed.
- ✔ Flexible, Full-Contact Bonding — Engineered to conform to curved trunk surfaces, the emblem flexes for 100% edge-to-edge adhesion — no raised corners or loose edges.
- ✔ 3-Year Indoor/Outdoor Guarantee — Built tough in Australia and tested against extreme weather, this badge is backed by a 3-year warranty for complete peace of mind.
- ✔ True Direct Replacement Fitment — Made to the same specifications as OEM badges for the UX 200, so alignment, sizing, and letter spacing match your trunk perfectly — no guesswork.
Product Specifications
| Brand / Model | Lexus UX 200 / F-Sport Compatible |
| Material | Automotive-grade ABS plastic with UV-stable gloss black coating |
| Finish / Color | Gloss Black — high-shine, scratch-resistant |
| Badge Type | 3D raised letter logo emblem (pre-assembled letter set) |
| Adhesive | Paint-safe automotive-grade pressure-sensitive adhesive (no foam tape) |
| Weight | Approx. 0.6 oz (17 g) — lightweight, no added trunk load |
| Dimensions (letter set) | Approx. 10.5 in (26.5 cm) overall width · 0.8 in (2 cm) letter height |
| Warranty | 3-year indoor/outdoor guarantee against fading, peeling, and adhesion failure |
| Country of Manufacture | Australia — high-quality production standards |
| Quantity | 1 complete badge set (all letters and logo elements) |
Vehicle Fitment
Designed as a direct trunk badge replacement for the following Lexus UX 200 models. Also compatible with F-Sport trims for a coordinated gloss black appearance.
Note: This badge is sized specifically for the UX 200 trunk lid emblem position. Always verify your existing badge width before ordering. For non-Lexus applications, confirm surface curvature and dimensions.
Installation Instructions
- 1 Clean the surface thoroughly — Wash the trunk area with soap and water, then wipe with isopropyl alcohol (70% or higher) to remove all wax, grease, and residue. Let it dry completely for 5 minutes.
- 2 Dry-fit the badge — Hold the emblem in position on the trunk to confirm alignment, centering, and fitment. Use low-adhesive painter’s tape to mark the corners if needed.
- 3 Peel the backing liner — Carefully remove the protective film from the adhesive side of the emblem. Avoid touching the adhesive with your fingers to keep it clean.
- 4 Position and press firmly — Align the badge using your tape marks or visual reference, then press it onto the surface. Apply firm, even pressure across the entire emblem for 30–60 seconds.
- 5 Wait 24 hours for full bond — Avoid washing the vehicle or exposing the badge to heavy rain for 24 hours to allow the adhesive to reach maximum strength. The bond will continue to cure over the next 2–3 days.
- 6 Enjoy your refreshed look — Your new gloss black UX 200 badge is now securely installed. Check the edges after the first wash to ensure full adhesion. No maintenance required.
Package Includes
- ✔ 1 x Lexus UX 200 gloss black trunk letter logo badge emblem (full set)
- ✔ Pre-installed automotive-grade paint-safe adhesive backing (protective liner attached)
Search Terms & Keywords
Will this item fit your vehicle?
To ensure You order the correct part for your car's particular make and model, please pay careful attention to the Item Specifics and Description.If You are not sure about what exactly You need - feel free to contact Us every working day (except on weekend) and get professional assistance within 24 hours - that way You will get the right part and do not need to deal with returns - save your time!
If you are not 100% delighted with your purchase, US85 will gladly accept your return within 30 days if your warranty permits. Please contact our Customer Service team to obtain an RMA (Return Merchandise Authorization) within 30-days of your purchase. To ensure a speedy return, all returned items require an RMA. Items without an RMA may be delayed or returned to the sender.
Return Process
To return merchandise, please use one of the following methods:
Within 30 Days of Purchase
Please contact our Customer Service team to obtain a Pre-Paid Return Label within 30 days of your purchase. No postage is required for your shipment with this label. A return shipping charge will be deducted from your refund on returns of items that are not the result of a US85.com error.
Upon receiving, your return will be processed within 2-3 business days. You will receive a notification when your return has been processed.
After 30 Days of Purchase
If your purchase date is over 30 days and you are still not satisfied with your purchase, you will need to use your own shipping methods to return the item. US85 does not provide a pre-paid return label for returns over 60 days. We are unable to offer refunds on purchases over 30 days old.
Please allow approximately 2-3 business days for processing. You will receive a notification when your return has been processed.
Refund Process
For your safety, we will issue a refund to the card that was used to pay for your purchase. Normally it takes about 2-3 business days after we receive the package for your return to be processed. If you paid with store credit, that credit will be put back on your US85 account. There is no restocking fee applied to any returned goods. We will do our best to keep you informed throughout the process via email. If you have any questions please don’t hesitate to give us a call at (650) 267-4452